Körner

Ofenanlagen für Draht und Band

Furnaces for wire and strip

Home

KÖRNER Zinc Dross Distilling Furnace

Recycling for the environment

KÖRNER Zinc Dross Distilling Furnace

There is hard zinc in any galvanizing shop. For example, the molten zinc dissolves the iron from work pieces that have been hot dip galvanized, from the wall of the galvanizing boiler or from the flux. It must be removed from the zinc bath on a regular basis.

KÖRNER Zinc Dross Grab

Remove zinc dross easier, faster and more cost-effective

KÖRNER Zinc Dross Grab

Zinc dross arises as reaction on the coincidence of iron and molten zinc in every galvanizing shop. Thus zinc dross must be regularly removed from the zinc bath.

According to the conventional method – by means of zinc spoon – this is a hard work mostly accompanied by strong impact of heat.

Zinc feed pump

The zinc feed pump is required to pump the liquid zinc out of the boiler at the time of the boiler exchange.

Max. kettle depth Vertical pumping head Horizontal pumping length Capacity Electrical drive
Type40 3,000mm 4,000mm (max.) from kettle bottom approx. 10,000mm 40t/h (max.) 7kW
Type130 3,000mm 6,000mm (max.) from kettle bottom approx. 10,000mm 130t/h (max.) 15kW

It consists of:

  • Solid steel frame
  • Pump housing with impeller,
  • Hard chrome plated driveshaft
  • Fan
  • Three-phase motor
  • Cable 20 m, with CEE plug

Letzte inhaltliche Änderung: 08.04.2014